7.5.1. CRUD Loopback¶
==============================================================================
CRUD Loopback
==============================================================================
test_crud (test_interface_crud.TestLoopbackInterfaceCRUD) OK
test_down (test_interface_crud.TestLoopbackInterfaceCRUD) OK
7.5.2. Flow-per-packet plugin¶
==============================================================================
Flow-per-packet plugin: test both L2 and IP4 reporting
==============================================================================
Flow per packet L3 test OK
7.5.3. DHCP¶
==============================================================================
DHCP Test Case
==============================================================================
DHCPv6 Proxy OK
DHCPv4 Proxy OK
7.5.4. IPv4 VRF Multi-instance¶
==============================================================================
IP4 VRF Multi-instance Test Case
==============================================================================
IP4 VRF Multi-instance test 1 - create 5 BDs OK
IP4 VRF Multi-instance test 2 - delete 2 VRFs OK
IP4 VRF Multi-instance 3 - add 2 VRFs OK
IP4 VRF Multi-instance test 4 - delete 4 VRFs OK
7.5.5. Load Balancer¶
==============================================================================
Load Balancer Test Case
==============================================================================
Load Balancer IP4 GRE4 OK
Load Balancer IP4 GRE6 OK
Load Balancer IP6 GRE4 OK
Load Balancer IP6 GRE6 OK
7.5.6. FIB Tests¶
==============================================================================
FIB Test Case
==============================================================================
FIB Unit Tests OK
7.5.7. BFD IPv6¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (IPv6)
==============================================================================
echo function used SKIP
echo packets looped back SKIP
hold BFD session up SKIP
bring BFD session up SKIP
bring BFD session up - first frame looked up by address pair SKIP
7.5.8. BFD authentication¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (SHA1 auth)
==============================================================================
hold BFD session up SKIP
hold BFD session up - meticulous auth SKIP
session is not brought down by unauthenticated msg SKIP
session is not brought down by msg with non-existent key-id SKIP
session is not brought down by msg with wrong auth type SKIP
simulate remote peer restart and resynchronization SKIP
session is not kept alive by msgs with bad sequence numbers SKIP
bring BFD session up SKIP
7.5.9. BFD CLI¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (CLI)
==============================================================================
create/modify/delete IPv4 BFD UDP session SKIP
create/modify/delete IPv6 BFD UDP session SKIP
create/modify/delete IPv6 BFD UDP session (authenticated) SKIP
create/modify/delete IPv4 BFD UDP session (authenticated) SKIP
put session admin-up and admin-down SKIP
turn authentication on and off SKIP
turn authentication on and off (delayed) SKIP
set/delete meticulous SHA1 auth key SKIP
set/delete SHA1 auth key SKIP
set/del udp echo source SKIP
show commands SKIP
7.5.10. BFD API¶
==============================================================================
Bidirectional Forwarding Detection (BFD) - API
==============================================================================
activate SHA1 authentication SKIP
create BFD session using non-existent SHA1 (negative case) SKIP
create a BFD session SKIP
create IPv6 BFD session SKIP
create a BFD session (SHA1) SKIP
add SHA1 keys SKIP
change SHA1 key SKIP
deactivate SHA1 authentication SKIP
create the same BFD session twice (negative case) SKIP
create the same BFD session twice (negative case) (SHA1) SKIP
modify BFD session parameters SKIP
share single SHA1 key between multiple BFD sessions SKIP
7.5.11. BFD authentication change¶
==============================================================================
Bidirectional Forwarding Detection (BFD) (changing auth)
==============================================================================
change auth key without disturbing session state (delayed) SKIP
change auth key without disturbing session state (immediate) SKIP
turn auth off without disturbing session state (delayed) SKIP
turn auth off without disturbing session state (immediate) SKIP
turn auth on without disturbing session state (delayed) SKIP
turn auth on without disturbing session state (immediate) SKIP
7.5.12. BFD IPv4¶
==============================================================================
Bidirectional Forwarding Detection (BFD)
==============================================================================
put session admin-up and admin-down SKIP
configuration change while peer in demand mode SKIP
verify session goes down after inactivity SKIP
echo function SKIP
session goes down if echo function fails SKIP
echo packets looped back SKIP
echo function stops if echo source is removed SKIP
echo function stops if peer sets required min echo rx zero SKIP
hold BFD session up SKIP
immediately honor remote required min rx reduction SKIP
echo packets with invalid checksum don't keep a session up SKIP
large remote required min rx interval SKIP
modify detect multiplier SKIP
modify session - double required min rx SKIP
modify session - halve required min rx SKIP
no periodic frames outside poll sequence if remote demand set SKIP
test correct response to control frame with poll bit set SKIP
test poll sequence queueing SKIP
bring BFD session down SKIP
bring BFD session up SKIP
bring BFD session up - first frame looked up by address pair SKIP
verify slow periodic control frames while session down SKIP
stale echo packets don't keep a session up SKIP
no packets when zero remote required min rx interval SKIP
7.5.13. IPv6 Tests¶
==============================================================================
IPv6 Test Case
==============================================================================
IPv6 FIB test OK
IPv6 Neighbour Solicitation Exceptions OK
IPv6 Router Solicitation Exceptions OK
==============================================================================
IPv6 disabled
==============================================================================
IP Disabled OK
IPv6 ND Proxy
==============================================================================
IPv6 ND ProxyTest Case
==============================================================================
IPv6 Proxy ND OK
==============================================================================
IPv6 routes via NULL
==============================================================================
IP NULL route OK
7.5.14. SPAN Test¶
==============================================================================
SPAN Test Case
==============================================================================
SPAN test OK
7.5.15. GRE Tests¶
==============================================================================
GRE Test Case
==============================================================================
GRE tunnel Tests OK
GRE tunnel L2 Tests OK
GRE tunnel VRF Tests OK
7.5.16. L2BD Multi-instance¶
==============================================================================
L2BD Multi-instance Test Case
==============================================================================
L2BD Multi-instance test 1 - create 5 BDs SKIP
L2BD Multi-instance test 2 - update data of 5 BDs SKIP
L2BD Multi-instance 3 - delete 2 BDs SKIP
L2BD Multi-instance test 4 - add 2 BDs SKIP
L2BD Multi-instance 5 - delete 5 BDs SKIP
7.5.17. MAP Tests¶
==============================================================================
MAP Test Case
==============================================================================
MAP-E OK
7.5.18. LISP tests¶
==============================================================================
Basic LISP test
==============================================================================
Test case for basic encapsulation OK
7.5.19. NAT Test Cases¶
==============================================================================
SNAT Test Cases
==============================================================================
SNAT dynamic translation test OK
SNAT handling of client packets with TTL=1 OK
SNAT handling of error responses to client packets with TTL=2 OK
SNAT handling of server packets with TTL=1 OK
SNAT handling of error responses to server packets with TTL=2 OK
SNAT hairpinning OK
SNAT multiple inside interfaces with overlapping address space OK
Acquire SNAT addresses from interface OK
Static mapping with addresses from interface OK
S-NAT IPFIX logging NAT addresses exhausted OK
S-NAT IPFIX logging NAT44 session created/delted OK
MAX translations per user - recycle the least recently used OK
SNAT multiple inside interfaces (non-overlapping address space) OK
Ping internal host from outside network OK
Ping SNAT out interface from outside network OK
S-NAT add pool addresses to FIB OK
SNAT 1:1 NAT initialized from inside network OK
SNAT 1:1 NAT initialized from outside network OK
SNAT 1:1 NAT VRF awareness OK
SNAT 1:1 NAT with port initialized from inside network OK
SNAT 1:1 NAT with port initialized from outside network OK
S-NAT tenant VRF independent address pool mode OK
S-NAT tenant VRF aware address pool mode OK
==============================================================================
Deterministic NAT Test Cases
==============================================================================
S-NAT run deterministic mode OK
7.5.20. L2XC Multi-instance¶
==============================================================================
L2XC Multi-instance Test Case
==============================================================================
L2XC Multi-instance test 1 - create 10 cross-connects OK
L2XC Multi-instance test 2 - delete 4 cross-connects OK
L2BD Multi-instance 3 - add new 4 cross-connects OK
L2XC Multi-instance test 4 - delete 10 cross-connects OK
7.5.21. IPv4 Tests¶
==============================================================================
IPv4 Test Case
==============================================================================
IPv4 FIB test OK
==============================================================================
IPv4 routes via NULL
==============================================================================
IP NULL route OK
==============================================================================
IPv4 disabled
==============================================================================
IP Disabled OK
7.5.22. IPv4 FIB CRUD¶
==============================================================================
FIB - add/update/delete - ip4 routes
==============================================================================
Add 1k routes OK
Delete 100 routes OK
Add 1k routes OK
Delete 1.5k routes OK
7.5.23. IRB Tests¶
==============================================================================
IRB Test Case
==============================================================================
IPv4 IRB test 1 OK
IPv4 IRB test 2 OK
7.5.24. ACL Security Groups¶
==============================================================================
ACL plugin Test Case
==============================================================================
ACL plugin version check; learn MACs OK
ACL create test OK
permit ACL apply test OK
deny ACL apply test OK
VPP_624 permit ICMPv4 OK
VPP_624 permit ICMPv6 OK
VPP_624 deny ICMPv4 OK
VPP_624 deny ICMPv6 OK
permit TCPv4 OK
permit TCPv6 OK
permit UDPv4 OK
permit UDPv6 OK
deny TCPv4/v6 OK
deny UDPv4/v6 OK
verify add/dump acls OK
permit single TCPv4 OK
permit single UDPv4 OK
permit single TCPv6 OK
permit single UPPv6 OK
deny single TCPv4/v6 OK
deny single UDPv4/v6 OK
deny single UDPv4/v6, permit ip any, verify non-initial fragment blocked OK
7.5.25. MPLS Tests¶
==============================================================================
MPLS Test Case
==============================================================================
MPLS Local Label Binding test OK
MPLS Deagg OK
MPLS label imposition test OK
MPLS label swap tests OK
MPLS Tunnel Tests OK
MPLS V4 Explicit NULL test OK
MPLS V6 Explicit NULL test OK
==============================================================================
MPLS disabled
==============================================================================
MPLS Disabled OK
7.5.26. IPv6 VRF Multi-instance¶
==============================================================================
IP6 VRF Multi-instance Test Case
==============================================================================
IP6 VRF Multi-instance test 1 - create 4 VRFs OK
IP6 VRF Multi-instance test 2 - reset 2 VRFs OK
IP6 VRF Multi-instance 3 - add 2 VRFs OK
IP6 VRF Multi-instance test 4 - reset 4 VRFs OK
7.5.27. L2XC Tests¶
==============================================================================
L2XC Test Case
==============================================================================
L2XC dual-loop test OK
L2XC single-loop test OK
7.5.28. MFIB Tests¶
==============================================================================
MFIB Test Case
==============================================================================
MFIB Unit Tests OK
7.5.29. IP Multicast Tests¶
==============================================================================
IP Multicast Test Case
==============================================================================
IPv6 Multicast Replication OK
IP Multicast Replication OK
IP Multicast Connected Source check OK
IP Multicast Signal OK
7.5.30. Classifier¶
==============================================================================
Classifier Test Case
==============================================================================
IP ACL test OK
MAC ACL test OK
IP PBR test OK
7.5.31. IRB Tests¶
==============================================================================
IRB Test Case
==============================================================================
ACL plugin prepare OK
ACL IPv6 routed -> bridged, L2 ACL deny OK
ACL IPv6 routed -> bridged, L3 ACL deny OK
ACL IPv4 routed -> bridged, L2 ACL deny OK
ACL IPv4 routed -> bridged, L3 ACL deny OK
ACL IPv6 bridged -> routed, L2 ACL deny OK
ACL IPv6 bridged -> routed, L3 ACL deny OK
ACL IPv4 bridged -> routed, L2 ACL deny OK
ACL IPv4 bridged -> routed, L3 ACL deny OK
ACL IPv6 routed -> bridged, L2 ACL permit+reflect OK
ACL IPv6 bridged -> routed, L2 ACL permit+reflect OK
ACL IPv4 routed -> bridged, L2 ACL permit+reflect OK
ACL IPv4 bridged -> routed, L2 ACL permit+reflect OK
ACL IPv6 routed -> bridged, L3 ACL permit+reflect OK
ACL IPv6 bridged -> routed, L3 ACL permit+reflect OK
ACL IPv4 routed -> bridged, L3 ACL permit+reflect OK
ACL IPv4 bridged -> routed, L3 ACL permit+reflect OK
ACL IPv6+EH routed -> bridged, L2 ACL deny OK
ACL IPv6+EH routed -> bridged, L3 ACL deny OK
ACL IPv6+EH bridged -> routed, L2 ACL deny OK
ACL IPv6+EH bridged -> routed, L3 ACL deny OK
ACL IPv6+EH routed -> bridged, L2 ACL permit+reflect OK
ACL IPv6+EH bridged -> routed, L2 ACL permit+reflect OK
ACL IPv6+EH routed -> bridged, L3 ACL permit+reflect OK
ACL IPv6+EH bridged -> routed, L3 ACL permit+reflect OK
ACL IPv4+MF routed -> bridged, L2 ACL deny OK
ACL IPv4+MF routed -> bridged, L3 ACL deny OK
ACL IPv4+MF bridged -> routed, L2 ACL deny OK
ACL IPv4+MF bridged -> routed, L3 ACL deny OK
ACL IPv4+MF routed -> bridged, L2 ACL permit+reflect OK
ACL IPv4+MF bridged -> routed, L2 ACL permit+reflect OK
ACL IPv4+MF routed -> bridged, L3 ACL permit+reflect OK
ACL IPv4+MF bridged -> routed, L3 ACL permit+reflect OK
ACL plugin set old L2 datapath OK
ACL IPv6 routed -> bridged, L2 ACL deny OK
ACL IPv6 routed -> bridged, L3 ACL deny OK
ACL IPv4 routed -> bridged, L2 ACL deny OK
ACL IPv4 routed -> bridged, L3 ACL deny OK
ACL IPv6 bridged -> routed, L2 ACL deny OK
ACL IPv6 bridged -> routed, L3 ACL deny OK
ACL IPv4 bridged -> routed, L2 ACL deny OK
ACL IPv4 bridged -> routed, L3 ACL deny OK
7.5.32. VXLAN Tests¶
==============================================================================
VXLAN Test Case
==============================================================================
Decapsulation test OK
Encapsulation test OK
Multicast flood test OK
Multicast receive test OK
Unicast flood test OK
7.5.33. L2 FIB CRUD¶
==============================================================================
L2 FIB Test Case
==============================================================================
L2 FIB test 1 - program 100 MAC addresses OK
L2 FIB test 2 - delete 12 MAC entries OK
L2 FIB test 3 - program new 100 MAC addresses OK
L2 FIB test 4 - delete 160 MAC entries OK
7.5.34. ARP Tests¶
==============================================================================
ARP Test Case
==============================================================================
ARP OK
MPLS OK
Proxy ARP OK
7.5.35. L2BD Tests¶
==============================================================================
L2BD Test Case
==============================================================================
L2BD MAC learning dual-loop test OK
L2BD MAC learning single-loop test OK