7.11.1.2. chain_ipsec¶
7.11.1.2.1. 10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${10000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.1.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.1.2. 64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.1.3. 64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.1.4. 64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.1.5. 1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.1.6. 1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.1.7. 1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.1.8. 9000B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.1.9. 9000B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.1.10. 9000B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.1.11. IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.1.12. IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.1.13. IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.2. 10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${10000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.2.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.2.2. 64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.2.3. 64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.2.4. 64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.2.5. 1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.2.6. 1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.2.7. 1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.2.8. 9000B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.2.9. 9000B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.2.10. 9000B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.2.11. IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.2.12. IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.2.13. IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.3. 10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${10000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.3.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.3.2. 64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.3.3. 64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.3.4. 64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.3.5. 1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.3.6. 1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.3.7. 1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.3.8. 9000B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.3.9. 9000B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.3.10. 9000B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.3.11. IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.3.12. IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.3.13. IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.4. 10ge2p1x710-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_10000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${10000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.4.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.4.2. 64B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.4.3. 64B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.4.4. 64B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.4.5. 1518B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.4.6. 1518B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.4.7. 1518B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.4.8. 9000B-1c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.4.9. 9000B-2c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.4.10. 9000B-4c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.4.11. IMIX-1c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.4.12. IMIX-2c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.4.13. IMIX-4c-ethip4ipsec10000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.5. 10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${1000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.5.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.5.2. 64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.5.3. 64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.5.4. 64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.5.5. 1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.5.6. 1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.5.7. 1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.5.8. 9000B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.5.9. 9000B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.5.10. 9000B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.5.11. IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.5.12. IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.5.13. IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.6. 10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${1000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.6.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.6.2. 64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.6.3. 64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.6.4. 64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.6.5. 1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.6.6. 1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.6.7. 1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.6.8. 9000B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.6.9. 9000B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.6.10. 9000B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.6.11. IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.6.12. IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.6.13. IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.7. 10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${1000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.7.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.7.2. 64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.7.3. 64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.7.4. 64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.7.5. 1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.7.6. 1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.7.7. 1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.7.8. 9000B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.7.9. 9000B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.7.10. 9000B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.7.11. IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.7.12. IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.7.13. IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.8. 10ge2p1x710-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${1000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.8.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.8.2. 64B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.8.3. 64B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.8.4. 64B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.8.5. 1518B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.8.6. 1518B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.8.7. 1518B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.8.8. 9000B-1c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.8.9. 9000B-2c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.8.10. 9000B-4c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.8.11. IMIX-1c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.8.12. IMIX-2c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.8.13. IMIX-4c-ethip4ipsec1000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.9. 10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${20000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.9.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.9.2. 64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.9.3. 64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.9.4. 64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.9.5. 1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.9.6. 1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.9.7. 1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.9.8. 9000B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.9.9. 9000B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.9.10. 9000B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.9.11. IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.9.12. IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.9.13. IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.10. 10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${20000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.10.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.10.2. 64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.10.3. 64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.10.4. 64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.10.5. 1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.10.6. 1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.10.7. 1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.10.8. 9000B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.10.9. 9000B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.10.10. 9000B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.10.11. IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.10.12. IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.10.13. IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.11. 10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${20000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.11.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.11.2. 64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.11.3. 64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.11.4. 64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.11.5. 1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.11.6. 1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.11.7. 1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.11.8. 9000B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.11.9. 9000B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.11.10. 9000B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.11.11. IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.11.12. IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.11.13. IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.12. 10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${20000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.12.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.12.2. 64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.12.3. 64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.12.4. 64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.12.5. 1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.12.6. 1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.12.7. 1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.12.8. 9000B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.12.9. 9000B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.12.10. 9000B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.12.11. IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.12.12. IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.12.13. IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.13. 10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${40000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.13.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.13.2. 64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.13.3. 64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.13.4. 64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.13.5. 1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.13.6. 1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.13.7. 1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.13.8. 9000B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.13.9. 9000B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.13.10. 9000B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.13.11. IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.13.12. IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.13.13. IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.14. 10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${40000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.14.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.14.2. 64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.14.3. 64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.14.4. 64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.14.5. 1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.14.6. 1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.14.7. 1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.14.8. 9000B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.14.9. 9000B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.14.10. 9000B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.14.11. IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.14.12. IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.14.13. IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.15. 10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${40000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.15.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.15.2. 64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.15.3. 64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.15.4. 64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.15.5. 1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.15.6. 1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.15.7. 1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.15.8. 9000B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.15.9. 9000B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.15.10. 9000B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.15.11. IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.15.12. IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.15.13. IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.16. 10ge2p1x710-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${40000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.16.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.16.2. 64B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.16.3. 64B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.16.4. 64B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.16.5. 1518B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.16.6. 1518B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.16.7. 1518B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.16.8. 9000B-1c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.16.9. 9000B-2c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.16.10. 9000B-4c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.16.11. IMIX-1c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.16.12. IMIX-2c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.16.13. IMIX-4c-ethip4ipsec40000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.17. 10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${400}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.17.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes} ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.17.2. 64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.17.3. 64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.17.4. 64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.17.5. 1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.17.6. 1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.17.7. 1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.17.8. 9000B-1c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.17.9. 9000B-2c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.17.10. 9000B-4c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.17.11. IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.17.12. IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.17.13. IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.18. 10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${400}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.18.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.18.2. 64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.18.3. 64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.18.4. 64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.18.5. 1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.18.6. 1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.18.7. 1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.18.8. 9000B-1c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.18.9. 9000B-2c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.18.10. 9000B-4c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.18.11. IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.18.12. IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.18.13. IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.19. 10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${400}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.19.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.19.2. 64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.19.3. 64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.19.4. 64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.19.5. 1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.19.6. 1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.19.7. 1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.19.8. 9000B-1c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.19.9. 9000B-2c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.19.10. 9000B-4c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.19.11. IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.19.12. IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.19.13. IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.20. 10ge2p1x710-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_400
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${400}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.20.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.20.2. 64B-1c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.20.3. 64B-2c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.20.4. 64B-4c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.20.5. 1518B-1c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.20.6. 1518B-2c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.20.7. 1518B-4c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.20.8. 9000B-1c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.20.9. 9000B-2c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.20.10. 9000B-4c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.20.11. IMIX-1c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.20.12. IMIX-2c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.20.13. IMIX-4c-ethip4ipsec400tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.21. 10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${40}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.21.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.21.2. 64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.21.3. 64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.21.4. 64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.21.5. 1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.21.6. 1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.21.7. 1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.21.8. 9000B-1c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.21.9. 9000B-2c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.21.10. 9000B-4c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.21.11. IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.21.12. IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.21.13. IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.22. 10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${40}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.22.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.22.2. 64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.22.3. 64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.22.4. 64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.22.5. 1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.22.6. 1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.22.7. 1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.22.8. 9000B-1c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.22.9. 9000B-2c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.22.10. 9000B-4c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.22.11. IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.22.12. IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.22.13. IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.23. 10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${40}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.23.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.23.2. 64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.23.3. 64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.23.4. 64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.23.5. 1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.23.6. 1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.23.7. 1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.23.8. 9000B-1c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.23.9. 9000B-2c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.23.10. 9000B-4c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.23.11. IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.23.12. IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.23.13. IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.24. 10ge2p1x710-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_40
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${40}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.24.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.24.2. 64B-1c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.24.3. 64B-2c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.24.4. 64B-4c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.24.5. 1518B-1c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.24.6. 1518B-2c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.24.7. 1518B-4c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.24.8. 9000B-1c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.24.9. 9000B-2c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.24.10. 9000B-4c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.24.11. IMIX-1c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.24.12. IMIX-2c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.24.13. IMIX-4c-ethip4ipsec40tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.25. 10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${4}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.25.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.25.2. 64B-1c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.25.3. 64B-2c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.25.4. 64B-4c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.25.5. 1518B-1c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.25.6. 1518B-2c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.25.7. 1518B-4c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.25.8. 9000B-1c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.25.9. 9000B-2c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.25.10. 9000B-4c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.25.11. IMIX-1c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.25.12. IMIX-2c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.25.13. IMIX-4c-ethip4ipsec4tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.26. 10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${4}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.26.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.26.2. 64B-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.26.3. 64B-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.26.4. 64B-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.26.5. 1518B-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.26.6. 1518B-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.26.7. 1518B-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.26.8. 9000B-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.26.9. 9000B-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.26.10. 9000B-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.26.11. IMIX-1c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.26.12. IMIX-2c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.26.13. IMIX-4c-ethip4ipsec4tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.27. 10ge2p1x710-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${4}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.27.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.27.2. 64B-1c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.27.3. 64B-2c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.27.4. 64B-4c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.27.5. 1518B-1c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.27.6. 1518B-2c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.27.7. 1518B-4c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.27.8. 9000B-1c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.27.9. 9000B-2c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.27.10. 9000B-4c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.27.11. IMIX-1c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.27.12. IMIX-2c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.27.13. IMIX-4c-ethip4ipsec4tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.28. 10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${5000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.28.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.28.2. 64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.28.3. 64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.28.4. 64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.28.5. 1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.28.6. 1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.28.7. 1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.28.8. 9000B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.28.9. 9000B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.28.10. 9000B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.28.11. IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.28.12. IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.28.13. IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.29. 10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${5000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.29.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.29.2. 64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.29.3. 64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.29.4. 64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.29.5. 1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.29.6. 1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.29.7. 1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.29.8. 9000B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.29.9. 9000B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.29.10. 9000B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.29.11. IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.29.12. IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.29.13. IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.30. 10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${5000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.30.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.30.2. 64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.30.3. 64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.30.4. 64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.30.5. 1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.30.6. 1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.30.7. 1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.30.8. 9000B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.30.9. 9000B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.30.10. 9000B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.30.11. IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.30.12. IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.30.13. IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.31. 10ge2p1x710-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_5000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${5000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.31.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.31.2. 64B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.31.3. 64B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.31.4. 64B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.31.5. 1518B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.31.6. 1518B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.31.7. 1518B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.31.8. 9000B-1c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.31.9. 9000B-2c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.31.10. 9000B-4c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.31.11. IMIX-1c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.31.12. IMIX-2c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.31.13. IMIX-4c-ethip4ipsec5000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.32. 10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 8 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 8DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${8}
| ${n_tunnels}= | ${60000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.32.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.32.2. 64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.32.3. 64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.32.4. 64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.32.5. 1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.32.6. 1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.32.7. 1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.32.8. 9000B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.32.9. 9000B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.32.10. 9000B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.32.11. IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.32.12. IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.32.13. IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-16mif-8dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.33. 10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 1 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 1DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${1}
| ${n_tunnels}= | ${60000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.33.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.33.2. 64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.33.3. 64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.33.4. 64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.33.5. 1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.33.6. 1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.33.7. 1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.33.8. 9000B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.33.9. 9000B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.33.10. 9000B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.33.11. IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.33.12. IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.33.13. IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-2mif-1dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.34. 10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 2 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${2}
| ${n_tunnels}= | ${60000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.34.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.34.2. 64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.34.3. 64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.34.4. 64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.34.5. 1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.34.6. 1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.34.7. 1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.34.8. 9000B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.34.9. 9000B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.34.10. 9000B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.34.11. IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.34.12. IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.34.13. IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}
7.11.1.2.35. 10ge2p1x710-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr suite¶
RFC2544: Pkt throughput L2BD test cases with memif 1 chain 4 docker container
[Top] Network Topologies: TG-DUT1-DUT2-TG 3-node circular topology with single links between nodes.
[Enc] Packet Encapsulations: Eth-IPv4 for L2 bridge domain.
[Ver] TG verification: TG finds and reports throughput NDR (Non Drop Rate) with zero packet loss tolerance and throughput PDR (Partial Drop Rate) with non-zero packet loss tolerance (LT) expressed in percentage of packets transmitted. NDR and PDR are discovered for different Ethernet L2 frame sizes using MLRsearch library.
Test packets are generated by TG on links to DUTs. TG traffic profile contains two L3 flow-groups (flow-group per direction, 254 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and static payload. MAC addresses are matching MAC addresses of the TG node interfaces.
[Ref] Applicable standard specifications: RFC4303 and RFC2544.
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_60000
| ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 4DCR
| ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
| ... | AES_256_GCM | AES | DRV_VFIO_PCI
| ... | RXQ_SIZE_0 | TXQ_SIZE_0
| ... | ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm
|
| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance | container
|
| Test Template | Local Template
|
| *** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
| ... | crypto_openssl_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 0
| ${nic_txq_size}= | 0
| ${nic_pfs}= | 2
| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${54}
| ${tg_if1_ip4}= | 192.168.10.254
| ${dut1_if1_ip4}= | 192.168.10.11
| ${dut1_if2_ip4}= | 100.0.0.254
| ${dut2_if1_ip4}= | 200.0.0.101
| ${dut2_if2_ip4}= | 192.168.20.11
| ${tg_if2_ip4}= | 192.168.20.254
| ${raddr_ip4}= | 20.0.0.0
| ${laddr_ip4}= | 10.0.0.0
| ${addr_range}= | ${24}
| ${n_instances}= | ${4}
| ${n_tunnels}= | ${60000}
| ${nf_dtcr}= | ${1}
| ${nf_dtc}= | ${1}
# Traffic profile:
| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
# Container
| ${container_engine}= | Docker
| ${container_chain_topology}= | chain_ipsec7.11.1.2.35.1. Local Template¶
[Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances} containers. Each DUT uses ${phy_cores} physical core(s) for worker threads.
[Ver] Measure NDR and PDR values using MLRsearch algorithm.
Arguments: - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). Type: integer, string - phy_cores - Number of physical cores. Type: integer - rxq - Number of RX queues, default value: ${None}. Type: integer
Set Test Variable \${frame_size}
${encr_alg}= Crypto Alg AES GCM 256
${auth_alg}= Set Variable ${None}
${ipsec_proto} = IPsec Proto ESP
Given Set Max Rate And Jumbo
And Add worker threads to all DUTs ${phy_cores} ${rxq}
And Pre-initialize layer driver ${nic_driver}
And Apply startup configuration on all VPP DUTs
When Initialize layer driver ${nic_driver}
And Initialize IPSec in 3-node circular topology
And Stop VPP service on all DUTs ${nodes}
And VPP IPsec Create Tunnel Interfaces in Containers ${nodes} ${dut1_if2_ip4} ${dut2_if1_ip4} ${n_tunnels} ${encr_alg} ${auth_alg} ${laddr_ip4} ${raddr_ip4} ${addr_range} ${n_instances}
And Start containers for test nf_chains=${1} nf_nodes=${n_instances} auto_scale=${False} pinning=${False}
And Start vswitch in container phy_cores=${phy_cores} rx_queues=${rxq}
Then Find NDR and PDR intervals using optimized search
7.11.1.2.35.2. 64B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${1}
7.11.1.2.35.3. 64B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${2}
7.11.1.2.35.4. 64B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${64} phy_cores=${4}
7.11.1.2.35.5. 1518B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${1}
7.11.1.2.35.6. 1518B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${2}
7.11.1.2.35.7. 1518B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${1518} phy_cores=${4}
7.11.1.2.35.8. 9000B-1c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${1}
7.11.1.2.35.9. 9000B-2c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${2}
7.11.1.2.35.10. 9000B-4c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=${9000} phy_cores=${4}
7.11.1.2.35.11. IMIX-1c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${1}
7.11.1.2.35.12. IMIX-2c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${2}
7.11.1.2.35.13. IMIX-4c-ethip4ipsec60000tnlsw-l2bd-1ch-8mif-4dcr1c-vppip4-aes256gcm-ndrpdr¶
frame_size=IMIX_v4_1 phy_cores=${4}